Technical Assistance in the design and implementation of the “First Steps Forward” plans in participating hromadas

World Bank · Ukraine · Deadline: 18 Dec 2026

Invitation for Proposals

(Consulting Services)

UKRAINE

Project: Lifting Education Access and Resilience in times of Need in Ukraine (LEARN) Project

Grant no.: TF0D0612

Name of the Contract: Consulting Services for the Technical Assistance in the design and implementation of the “First Steps Forward” plans in participating hromadas

Contract number: LEARN -ECE-1.2-FSF

Ukraine received the Grant No. TF0D0612 from the International Bank for Reconstruction and Development (IBRD) in US dollars to finance the Ukraine Improving Higher Education for Results Project and intends to use part of the funds to make payments under the Contract No. LEARN -ECE-1.2-FSF " Consulting Services for the Technical Assistance in the design and implementation of the “First Steps Forward” plans in participating hromadas ".

The Ministry of Education and Science of Ukraineinvites eligible participants (Consultant; Participant) to submit sealed proposals for the provision of the following services: Consulting Services for the Technical Assistance in the design and implementation of the “First Steps Forward” plans in participating hromadas (“Services”). Detailed information about the Services is provided in the Terms of Reference (Section 7) of the Request for Proposals.

The selection of Consultant will be carried out through Quality and Cost-based Selection (QCBS) based on a simplified technical proposal as specified in the Request for Proposals, in accordance with the World Bank’s “Procurement Regulations for IPF Borrowers”, as revised in September 2025, available at the link www.worldbank.org

The expected duration of the provision of services is 13 (thirteen) months from the date of signing the contract.

IBRD requires compliance with the Bank's Anti-Corruption Guidelines and its applicable sanctions policies and procedures, as outlined in the World Bank Group Sanctions Framework. In further compliance with this policy, Bidders shall permit and require their agents (whether declared or not), subcontractors, sub-consultants, service providers, suppliers and personnel to permit the Bank to inspect all invoices, records and other documents relating to the request for quotations and execution of the contract (in case of award), as well as for their verification by auditors appointed by the Bank.

The attention of interested Consultants is drawn to Section III, paragraphs, 3.14, 3.16, and 3.17 of the World Bank’s “Procurement Regulations for IPF Borrowers” September 2025, setting forth the World Bank’s policy on conflict of interest.

The technical proposals of the consultants will be evaluated in two parts. The following are the mandatory criteria that the consultants must meet. Technical proposals of consultants that do not meet the criteria listed below will not be evaluated and the proposal will be rejected:

1. Core Business and Years in Operation

1.1 Minimum of 7 (seven) years of operational experience in areas relevant to this assignment, including but not limited to education sector reform, capacity building, public sector advisory, training program development and delivery, and/or system-level planning in education (preferably early childhood or general education).

In the case of a JV, at least one member must have at least seven (7) years of operational experience.

2. Legal status and market experience

2.1 The Consultant (and each member of a JV) shall be a legally registered entity in Ukraine or abroad (in the case of foreign company, the representative office/JV/consortium with a local firm should exist by the date of the Contract signing).

3. Qualifications in the field of the assignment

3.1 At least 3 (three) successfully completed assignments within the last 7 (seven) years in areas such as:

- design and delivery of training or capacity building programs and/or;

- education system reform or policy support and/or;

- local-level planning, service delivery optimization, or network planning and/or;

- development of methodologies, tools, or frameworks for public sector planning (preferably in education or social sectors).

3.2 At least one successfully completed project involving the development and launch of an LMS or e-learning courses.

In the case of a JVCA, the Lead Member should have at least 1 assignment specified above while the combination of members must fully meet the requirement. The projects claimed by each JVCA member should be substantially completed during the above period either alone or as a member of a past JVCA with a minimum share of 50%.

In case of experience in the role of a member of a past JVCA and/or Subconsultant, the experience and amount will be determined based on the Consultant’s share and responsibility in the past JVCA or the amount of the Subconsultant’s contract.

Consultants may associate with other firms to enhance their qualifications, but should indicate clearly whether the association is in the form of a joint venture and/or a sub-consultancy. In the case of a joint venture, all the partners in the joint venture shall be jointly and severally liable for the entire contract, if selected.

Interested eligible participants can receive additional information, a complete set of the Request for Proposals, including the terms of reference, the proposal submission form and the contract form, as well as information on terms of submission of proposals upon request by email [email protected](Subject: LEARN -ECE-1.2-FSF Request for Proposals) or using the following link:

https://drive.google.com/file/d/1uLsWnWFM7EtHhcTvaiA94ogryqi0WUxc/view?usp=sharing

Proposals should be received at the address below by 14:00 p.m. local time on December 18, 2026. Submission of proposals in electronic form is not allowed. Proposals received later will be rejected.

Attention: Kateryna Kovtun, Procurement Specialist

Address: 16 Shevchenko Blvd., room 215

Postal code: 01601

City: Kyiv

Country: Ukraine

SELECTION OF CONSULTANTS

REQUEST FOR PROPOSALS

(DIRECT RFP WITHOUT EOI)

(for other than Supervision[1] and without use of e-procurement)

RFP No.: LEARN -ECE-1.2-FSF

Consulting Services for the

Technical Assistance in the design and implementation of the “First Steps Forward” plans in participating hromadas

Client: Ministry of Education and Science of Ukraine

Country: Ukraine

Project: Lifting Education Access and Resilience in times of Need in Ukraine Program

Issued on: November 09, 2026

TABLE OF CONTENT

PART I 4

Section 1. Letter of Invitation 4

Section 2. Instructions to Consultants and Data Sheet 7

Section 3. Technical Proposal – Standard Forms 43

Section 4. Financial Proposal - Standard Forms 59

Section 5. Eligible Countries 69

Section 6. Fraud and Corruption 70

Section 7. Terms of Reference 72

PART II 115

Section 8. Conditions of Contract and Contract Forms 115

PART I

Section 1. Letter of Invitation

Letter of Invitation

Consulting Services

Name of Assignment: Consultancy Services for the Technical Assistance in the design and implementation of the “First Steps Forward” plans in participating hromadas

RFP Reference No.: LEARN -ECE-1.2-FSF

Loan No./Credit No./ Grant No.: TF0D0612

Location and Date: November 09, 2026

Dear Mr. /Ms.:

  1. The Ministry of Education and Science of Ukraine (hereinafter called “Client”) has received financing from the International Bank for Reconstruction and Development (the “Bank”) in the form of a “grant” TF0D0612 (hereinafter called “grant”) toward the cost of Lifting Education Access and Resilience in times of Need in Ukraine Program (P504171). The Ministry of Education and Science of Ukraine, an implementing agency, intends to apply a portion of the proceeds of this grant to eligible payments under the contract for which this Request for Proposals is issued.
  2. The Ministry of Education and Science of Ukraine now invites sealed proposals to provide the following consulting services (hereinafter called “Services”): Consultancy Services for the Technical Assistance in the design and implementation of the “First Steps Forward” plans in participating hromadas. More details on the Services are provided in the Terms of Reference (Section 7).
  3. A firm will be selected under Quality and Cost-based Selection - QCBS Selection Method and in a Simplified Technical Proposal (STP) format as described in this RFP, in accordance with the Bank’s “Procurement Regulations for IPF Borrowers” September 2025 (“Procurement Regulations”), which can be found at the following website: www.worldbank.org
  4. The RFP includes the following documents:

Section 1 – Request for Proposals Letter

Section 2 - Instructions to Consultants and Data Sheet

Section 3 - Technical Proposal STP) - Standard Forms

Section 4 - Financial Proposal - Standard Forms

Section 5 – Eligible Countries

Section 6 – Fraud and Corruption

Section 7 - Terms of Reference

Section 8 - Standard Forms of Contract (Lump-Sum)

  1. Details on the proposal’s submission date, time and address are provided in ITC 17.7 and ITC 17.9.
  2. Attention is drawn to the Procurement Regulations requiring the Client to disclose information on the successful Consultant’s beneficial ownership, as part of the Contract Award Notice, using the Beneficial Ownership Disclosure Form as included in the Request for Proposals.

Yours sincerely,

Ministry of Education and Science of Ukraine

Anastasiia Sofiienko, Deputy of Minister

10 Beresteiskyi Avenue, Kyiv, 01135, Ukraine

+380 44 481 32 21

[email protected]

[email protected]

[1] For consulting services other than for supervision (project management) of infrastructure contracts (such as Plant and Works)

Instructions to Consultants

A. General Provisions

  1. Definitions
  1. “Affiliate(s)” means an individual or an entity that directly or indirectly controls, is controlled by, or is under common control with the Consultant.
  2. “Applicable Law” means the laws and any other instruments having the force of law in the Client’s country, or in such other country as may be specified in the Data Sheet, as they may be issued and in force from time to time.
  3. “Bank” means the International Bank for Reconstruction and Development (IBRD) or the International Development Association (IDA).
  4. “Borrower” means the Government, Government agency or other entity that signs the [loan/financing/grant[1]] agreement with the Bank.
  5. “Client” means the implementing agencythat signs the Contract for the Services with the selected Consultant.
  6. “Client’s Personnel” is as defined in Clause GCC 1.1 (e).
  7. “Consultant” means a legally-established professional consulting firm or an entity that may provide or provides the Services to the Client under the Contract.
  8. “Contract” means a legally binding written agreement signed between the Client and the Consultant and includes all the attached documents listed in its Clause 1 (the General Conditions of Contract (GCC), the Special Conditions of Contract (SCC), and the Appendices).
  9. “Data Sheet” means an integral part of the Instructions to Consultants (ITC) Section 2 that is used to reflect specific country and assignment conditions to supplement, but not to over-write, the provisions of the ITC.
  10. “Day” means a calendar day, unless otherwise specified as “Business Day”. A Business Day is any day that is an official working day of the Borrower. It excludes the Borrower’s official public holidays.
  11. “Experts” means, collectively, Key Experts, Non-Key Experts, or any other personnel of the Consultant, Sub-consultant or Joint Venture member(s).
  12. “Government” means the government of the Client’s country.
  13. “in writing” means communicated in written form (e.g. by mail, e-mail, fax, including, if specified in the Data Sheet, distributed or received through the electronic-procurement system used by the Client) with proof of receipt.
  14. “Joint Venture (JV)” means an association with or without a legal personality distinct from that of its members, of more than one Consultant where one member has the authority to conduct all business for and on behalf of any and all the members of the JV, and where the members of the JV are jointly and severally liable to the Client for the performance of the Contract.
  15. “Key Expert(s)” means an individual professional whose skills, qualifications, knowledge and experience are critical to the performance of the Services under the Contract and whose CV is taken into account in the technical evaluation of the Consultant’s proposal.
  16. “ITC” (this Section 2 of the RFP) means the Instructions to Consultants that provides the Consultants with all information needed to prepare their Proposals.
  17. “Non-Key Expert(s)” means an individual professional provided by the Consultant or its Sub-consultant and who is assigned to perform the Services or any part thereof under the Contract and whose CVs are not evaluated individually.
  18. “Proposal” means the Technical Proposal and the Financial Proposal of the Consultant.
  19. “RFP” means the Request for Proposals to be prepared by the Client for the selection of Consultants, based on the SPD - RFP.
  20. “Services” means the work to be performed by the Consultant pursuant to the Contract.
  21. “SPD - RFP” means the Standard Procurement Document - Request for Proposals, which must be used by the Client as the basis for the preparation of the RFP.
  22. “Sub-consultant” means an entity to whom the Consultant intends to subcontract any part of the Services while the Consultant remains responsible to the Client during the whole performance of the Contract.
  23. “Terms of Reference (TORs)” (this Section 7 of the RFP) means the Terms of Reference that explains the objectives, scope of work, activities, and tasks to be performed, respective responsibilities of the Client and the Consultant, and expected results and deliverables of the assignment.

2. Introduction

2.1. The Client named in the Data Sheet intends to select a Consultant from those listed in the Request for Proposals (RFP), in accordance with the method of selection specified in the Data Sheet.

2.2.The Consultants are invited to submit a Technical Proposal and a Financial Proposal, or a Technical Proposal only, as specified in the Data Sheet, for consulting services required for the assignment named in the Data Sheet. The Proposal will be the basis for negotiating and ultimately signing the Contract with the selected Consultant.

2.3. The Consultants should familiarize themselves with the local conditions and take them into account in preparing their Proposals, including attending a pre-proposal conference if one is specified in the Data Sheet. Attending any such pre-proposal conference is optional and is at the Consultants’ expense.

2.4.The Client will timely provide, at no cost to the Consultants, the inputs, relevant project data, and reports required for the preparation of the Consultant’s Proposal as specified in the Data Sheet.

3. Conflict of Interest

3.1.The Consultant is required to provide professional, objective, and impartial advice, at all times holding the Client’s interests paramount, strictly avoiding conflicts with other assignments or its own corporate interests, and acting without any consideration for future work.

3.2.The Consultant has an obligation to disclose to the Client any situation of actual or potential conflict that impacts its capacity to serve the best interest of its Client. Failure to disclose such situations may lead to the disqualification of the Consultant or the termination of its Contract and/or sanctions by the Bank.

3.2.1.Without limitation on the generality of the foregoing, the Consultant shall not be hired under the circumstances set forth below:

a. Conflicting Activities

(i) Conflict between consulting activities and procurement of goods, works or non-consulting services: a firm that has been engaged by the Client to provide goods, works, or non-consulting services for a project, or any of its Affiliates, shall be disqualified from providing consulting services resulting from or directly related to those goods, works, or non-consulting services. Conversely, a firm hired to provide consulting services for the preparation or implementation of a project, or any of its Affiliates, shall be disqualified from subsequently providing goods or works or non-consulting services resulting from or directly related to the consulting services for such preparation or implementation.

b. Conflicting Assignments

(ii) Conflict among consulting assignments: a Consultant (including its Experts and Sub-consultants) or any of its Affiliates shall not be hired for any assignment that, by its nature, may be in conflict with another assignment of the Consultant for the same or for another Client.

c. Conflicting Relationships

(iii) Relationship with the Client’s staff: a Consultant (including its Experts and Sub-consultants) that has a close business or family relationship with a professional staff of the Borrower (or of the Client, or of implementing agency, or of a recipient of a part of the Bank’s financing) who are directly or indirectly involved in any part of (i) the preparation of the Terms of Reference for the assignment, (ii) the selection process for the Contract, or (iii) the supervision of the Contract, may not be awarded a Contract, unless the conflict stemming from this relationship has been resolved in a manner acceptable to the Bank throughout the selection process and the execution of the Contract.

4. Unfair Competitive Advantage

4.1. Fairness and transparency in the selection process require that the Consultants or their Affiliates competing for a specific assignment do not derive a competitive advantage from having provided consulting services related to the assignment in question. To that end, the Client shall indicate in the Data Sheet and make available to all Consultants together with this RFP all information that would in that respect give such Consultant any unfair competitive advantage over competing Consultants.

5. Fraud and Corruption

5.1.The Bank requires compliance with the Bank’s Anti-Corruption Guidelines and its prevailing sanctions policies and procedures as set forth in the WBG’s Sanctions Framework, as set forth in Section 6.

5.2. In further pursuance of this policy, Consultants shall permit and shall cause their agents (where declared or not), subcontractors, subconsultants, service providers, suppliers, and personnel, to permit the Bank to inspect all accounts, records and other documents relating to any shortlisting process, Proposal submission, and contract performance (in the case of award), and to have them audited by auditors appointed by the Bank.

6. Eligibility

6.1.The Bank permits consultants (individuals and firms, including Joint Ventures and their individual members) from all countries to offer consulting services for Bank-financed projects.

6.2.Furthermore, it is the Consultant’s responsibility to ensure that its Experts, joint venture members, Sub-consultants, agents (declared or not), sub-contractors, service providers, suppliers and/or their employees meet the eligibility requirements as established by the Bank in the applicable Procurement Regulations.

6.3.As an exception to the foregoing ITC 6.1 and ITC 6.2 above:

a. Sanctions

6.3.1 A Consultant that has been sanctioned by the Bank, pursuant to the Bank’s Anti-Corruption Guidelines and in accordance with its prevailing sanctions policies and procedures as set forth in the WBG’s Sanctions Framework as described in Section VI, Fraud and Corruption, paragraph 2.2 d., shall be ineligible to be shortlisted for, submit proposals for, or be awarded a Bank-financed contract or benefit from a Bank-financed contract, financially or otherwise, during such period of time as the Bank shall have determined. The list of debarred firms and individuals is available at the electronic address specified in the Data Sheet.

b. Prohibitions

6.3.2. Firms and individuals of a country or goods manufactured in a country may be ineligible if so indicated in Section 5 (Eligible Countries) and:

(a) as a matter of law or official regulations, the Borrower’s country prohibits commercial relations with that country, provided that the Bank is satisfied that such exclusion does not preclude effective competition for the provision of Services required; or

(b) by an act of compliance with a decision of the United Nations Security Council taken under Chapter VII of the Charter of the United Nations, the Borrower’s Country prohibits any import of goods from that country or any payments to any country, person, or entity in that country.

c. Restrictions for State-Owned Enterprises

6.3.3. State-owned enterprises or institutions in the Borrower’s country may be eligible to compete and be awarded a contract only if they can establish, in a manner acceptable to the Bank, that they: (i) are legally and financially autonomous, (ii) operate under commercial law, and (iii) are not under supervision of the Client.

d. Restrictions for Public Employees

6.3.4. Government officials and civil servants of the Borrower’s country are not eligible to be included as Experts, individuals, or members of a team of Experts in the Consultant’s Proposal unless:

(i) the services of the government official or civil servant are of a unique and exceptional nature, or their participation is critical to project implementation; and

(ii) their hiring would not create a conflict of interest, including any conflict with employment or other laws, regulations, or policies of the Borrower.

B. Preparation of Proposals

7. General Considerations

7.1. In preparing the Proposal, the Consultant is expected to examine the RFP in detail. Material deficiencies in providing the information requested in the RFP may result in rejection of the Proposal.

8. Cost of Preparation of Proposal

8.1. The Consultant shall bear all costs associated with the preparation and submission of its Proposal, and the Client shall not be responsible or liable for those costs, regardless of the conduct or outcome of the selection process. The Client is not bound to accept any proposal, and reserves the right to annul the selection process at any time prior to Contract award, without thereby incurring any liability to the Consultant.

9. Language

9.1. The Proposal, as well as all correspondence and documents relating to the Proposal exchanged between the Consultant and the Client, shall be written in the language(s) specified in the Data Sheet.

10. Documents Comprising the Proposal

10.1. The Proposal shall comprise the documents and forms listed in the Data Sheet.

10.2.If specified in the Data Sheet, the Consultant shall include a statement of an undertaking of the Consultant to observe, in competing for and executing a contract, the Client country’s laws against fraud and corruption (including bribery).

10.3.The Consultant shall furnish information on commissions, gratuities, and fees, if any, paid or to be paid to agents or any other party relating to this Proposal and, if awarded, Contract execution, as requested in the Financial Proposal submission form (Section 4).

11. Only One Proposal

11.1 The Consultant (including the individual members of any Joint Venture) shall submit only one Proposal, either in its own name or as part of a Joint Venture in another Proposal. If a Consultant, including any Joint Venture member, submits or participates in more than one proposal, all such proposals shall be disqualified and rejected. This does not, however, preclude a Sub-consultant, or the Consultant’s staff from participating as Key Experts and Non-Key Experts in more than one Proposal when circumstances justify and if stated in the Data Sheet.

12. Proposal Validity

12.1. Proposals shall remain valid until the date specified in the Data Sheet or any extended date if amended by the Client in accordance with ITC 13.1.1.

12.2. During this period, the Consultant shall maintain its original Proposal without any change, including the availability of the Key Experts, the proposed rates and the total price.

12.3. If it is established that any Key Expert nominated in the Consultant’s Proposal was not available at the time of Proposal submission or was included in the Proposal without his/her confirmation, such Proposal shall be disqualified and rejected for further evaluation, and may be subject to sanctions in accordance with ITC 5.

a. Extension of Proposal Validity

12.4. The Client will make its best effort to complete the negotiations and award the contract prior to the date of expiry of the Proposal validity. However, should the need arise, the Client may request, in writing, all Consultants who submitted Proposals prior to the submission deadline to extend the Proposals’ validity.

12.5. If the Consultant agrees to extend the validity of its Proposal, it shall be done without any change in the original Proposal and with the confirmation of the availability of the Key Experts, except as provided in ITC 12.7.

12.6. The Consultant has the right to refuse to extend the validity of its Proposal in which case such Proposal will not be further evaluated.

b. Substitution of Key Experts at Validity Extension

12.7. If any of the Key Experts become unavailable for the extended validity period, the Consultant shall seek to substitute another Key Expert. The Consultant shall provide a written adequate justification and evidence satisfactory to the Client together with the substitution request. In such case, a substitute Key Expert shall have equal or better qualifications and experience than those of the originally proposed Key Expert. The technical evaluation score, however, will remain to be based on the evaluation of the CV of the original Key Expert.

12.8. If the Consultant fails to provide a substitute Key Expert with equal or better qualifications, or if the provided reasons for the replacement or justification are unacceptable to the Client, such Proposal will be rejected with the prior Bank’s no objection.

c. Sub-Contracting

12.9. The Consultant shall not subcontract the whole of the Services.

13. Clarification and Amendment of RFP

13.1.The Consultant may request a clarification of any part of the RFP during the period indicated in the Data Sheet before the Proposals’ submission deadline. Any request for clarification must be sent in writing, or by standard electronic means, to the Client’s address indicated in the Data Sheet. The Client will respond in writing, or by standard electronic means, and will send written copies of the response (including an explanation of the query but without identifying its source) to all Consultants. Should the Client deem it necessary to amend the RFP as a result of a clarification, it shall do so following the procedure described below:

13.1.1. At any time before the proposal submission deadline, the Client may amend the RFP by issuing an amendment in writing or by standard electronic means. The amendment shall be sent to all Consultants and will be binding on them. The Consultants shall acknowledge receipt of all amendments in writing.

13.1.2. If the amendment is substantial, the Client may extend the proposal submission deadline to give the Consultants reasonable time to take an amendment into account in their Proposals.

13.2. The Consultant may submit a modified Proposal or a modification to any part of it at any time prior to the proposal submission deadline. No modifications to the Technical or Financial Proposal shall be accepted after the deadline.

14. Preparation of Proposals Specific Considerations

14.1While preparing the Proposal, the Consultant must give particular attention to the following:

14.1.1. If a Consultant considers that it may enhance its expertise for the assignment by associating with other consultants in the form of a Joint Venture or as Sub-consultants, it may do so.

14.1.2. The Client may indicate in the Data Sheet the estimated Key Experts’ time input (expressed in person-month) or the Client’s estimated total cost of the assignment, but not both. This estimate is indicative and the Proposal shall be based on the Consultant’s own estimates for the same.

14.1.3. If stated in the Data Sheet, the Consultant shall include in its Proposal at least the same time input (in the same unit as indicated in the Data Sheet) of Key Experts, failing which the Financial Proposal will be adjusted for the purpose of comparison of proposals and decision for award in accordance with the procedure in the Data Sheet.

14.1.4. For assignments under the Fixed-Budget selection method, the estimated Key Experts’ time input is not disclosed. Total available budget, with an indication whether it is inclusive or exclusive of taxes,is given in the Data Sheet, and the Financial Proposal shall not exceed this budget.

15. Technical Proposal Format and Content

15.1. The Technical Proposal shall be prepared using the Standard Forms provided in Section 3 of the RFP and shall comprise the documents listed in the Data Sheet. The Technical Proposal shall not include any financial information. A Technical Proposal containing material financial information shall be declared non-responsive.

15.1.1 Consultant shall not propose alternative Key Experts. Only one CV shall be submitted for each Key Expert position. Failure to comply with this requirement will make the Proposal non-responsive.

15.2. Depending on the nature of the assignment, the Consultant is required to submit a Full Technical Proposal (FTP), or a Simplified Technical Proposal (STP) as indicated in the Data Sheet and using the Standard Forms provided in Section 3 of the RFP.

16. Financial Proposal

16.1. The Financial Proposal shall be prepared using the Standard Forms provided in Section 4 of the RFP. It shall list all costs associated with the assignment, including (a) remuneration for Key Experts and Non-Key E

Apply on the World Bank website

New UN jobs every morning on Telegram: @unjobshub

All open positions at World Bank